Phone Number

​604-256-5590

Address

843 Ewen Avenue, #11 New Westminster, BC, V3M0K6

An Expert Guide to Water Saving Showers

Are you tired of wasting water and money each time you take a shower? Look no further! Our article on water saving showers will provide you with valuable tips and information on how to conserve water and reduce your utility bills in Burnaby. With global water scarcity becoming a pressing concern, each of us needs to take action and make small changes in our daily routines. By using water saving showers, you can play your part in preserving this precious natural resource. Let’s dive in!

What Are Water Saving Showers?

Water saving showers are shower fixtures specifically designed to reduce water usage while still providing a satisfying shower experience with adequate water pressure. These showers often utilize technologies such as aerating jets, flow restrictors, or low-flow showerheads to achieve this goal.

How Do Water Saving Showers Work?

  • Water-saving showers work by utilizing aerators and flow restrictors to limit water flow.
  • Aerators mix air with the water to maintain high water pressure while reducing overall water usage.
  • Flow restrictors limit the flow rate, measured in gallons per minute, providing a steady stream while conserving water.
  • Some models also incorporate smart technologies, such as sensors, to regulate water usage based on occupancy.

What Are the Benefits of Using Water Saving Showers?

Water saving showers have become increasingly popular in recent years, and for good reason. This section will explore the various benefits of using water-saving showers in your daily routine. We will discuss how these showers not only save water and money but also reduce energy usage and promote sustainability. By the end, you’ll have a better understanding of why making the switch to a water-saving shower can have a positive impact on both your wallet and the environment.

Saves Water and Money

  • Install a low-flow showerhead to conserve water and save money on water bills.
  • Use aerated showerheads to give the feeling of high water pressure while using less water, resulting in cost savings.
  • Choose handheld showerheads to have the option to direct water flow and save water by targeting specific areas.
  • Consider dual showerheads to adjust water flow as needed, promoting efficient water usage and financial savings.

Reduces Energy Usage

  • Replace Existing Shower Head: Swap out your regular shower head with a low-flow or aerated shower head to decrease water usage and, consequently, reduce energy consumption.
  • Use Cold Water: Opt for cold or lukewarm water while showering to lessen the energy required to heat the water.
  • Install Water-Efficient Fixtures: Replace other bathroom fixtures with water-saving versions to further reduce energy usage.

Consider incorporating these changes to contribute to energy conservation and cost savings while maintaining a refreshing shower experience.

Promotes Sustainability

  • Upgrade to water-saving showerheads such as aerated or low-flow options to promote sustainability.
  • Utilize handheld or dual showerheads to better control water usage and minimize waste.
  • Encourage family members to be conscious of their water consumption while showering for a more sustainable impact.

Pro-tip: Consider installing a shower timer to monitor and limit shower durations, further contributing to sustainable water usage.

What Are the Different Types of Water Saving Showers?

When it comes to conserving water in Burnaby, one of the easiest places to start is in the shower. However, with so many different types of water saving showers on the market, it can be overwhelming to know which one is right for you. In this section, we will break down the various types of water saving showers available, including low-flow shower heads, aerated shower heads, handheld shower heads, and dual shower heads. Each type offers its unique features and benefits, so you can choose the one that best fits your needs and preferences.

Low-Flow Shower Heads

  • Check your current shower head for its gallons per minute (GPM) rating to determine the water flow.
  • Choose a low-flow shower head with a GPM rating of 2.0 or less for significant water savings.
  • When selecting a low-flow shower head, consider factors such as spray pattern, pressure, and overall water usage.
  • Follow the manufacturer’s instructions to install the low-flow shower head, making sure to create a tight and leak-free connection.

Aerated Shower Heads

  • Check water pressure compatibility to ensure optimal performance.
  • Look for aerated shower heads with adjustable settings for a personalized experience.
  • Choose a trusted brand with WaterSense certification for water efficiency.
  • Consider maintenance requirements and warranty when selecting a model.

Handheld Shower Heads

  • When selecting a handheld shower head, opt for one with multiple spray settings to customize your shower experience.
  • Make sure to consider the hose length to ensure it provides the desired flexibility and reach during use.
  • For efficient water usage, look for a handheld shower head with a WaterSense certification that saves water.
  • Choose a trusted brand known for durable and high-quality handheld shower heads.

Dual Shower Heads

  1. Before installing dual shower heads, make sure your plumbing system can support them by checking the water pressure and consulting a plumber if necessary.
  2. Choose a dual shower head design that matches your bathroom’s aesthetics and meets your showering preferences.
  3. Follow the manufacturer’s instructions to properly install the dual shower heads, ensuring a secure and watertight connection.
  4. Test the functionality of both shower heads to ensure they operate independently and as intended.

How to Choose the Right Water Saving Shower for Your Home?

With the increasing importance of water conservation, many Burnaby homeowners are looking for ways to reduce their water usage. One simple and effective way to do this is by switching to a water saving shower. However, not all water saving showers are created equal. In this section, we will discuss the key factors to consider when choosing the right water saving shower for your home. From water pressure and certifications to adjustable settings and trusted brands, we’ll help you make an informed decision for a more environmentally friendly and cost-effective shower experience.

Consider Your Water Pressure

  • Check your home’s water pressure using a pressure gauge.
  • Consider installing a pressure regulator if the pressure exceeds 80 psi.
  • For low pressure, select a shower head designed to enhance the flow at lower pressures.

Look for WaterSense Certification

  • Research: Explore different showerhead options with WaterSense certification for optimal water efficiency.
  • Comparison: Analyze flow rates and features of various showerheads that are WaterSense certified.
  • Cost-Benefit Analysis: Assess the cost savings and environmental benefits of selecting a WaterSense-certified showerhead.
  • Installation: Adhere to the manufacturer’s guidelines for proper installation of the chosen WaterSense-certified showerhead.

Check for Adjustable Settings

  • Look for showers with adjustable spray settings to customize the water flow according to your preferences.
  • Ensure the shower head offers various options for spray patterns and intensities to cater to different user needs.
  • Consider handheld shower heads with adjustable settings, allowing flexibility for directing the water flow as desired.

Choose a Trusted Brand

  1. Research: Investigate reliable brands with positive customer reviews and industry certifications.
  2. Quality: Choose a brand that prioritizes durability, performance, and water efficiency, such as Kohler or Delta.
  3. Warranty: Consider brands offering warranties to ensure long-term satisfaction and support.

What Are Some Tips for Saving Water in the Shower?

In our modern world, where water scarcity is becoming a growing concern, it is important to be mindful of our water usage, even in the shower. Luckily, there are many simple and effective ways to save water while still enjoying a refreshing shower. In this section, we will discuss some practical tips for reducing water consumption in the shower. From taking shorter showers to using a bucket to collect water, we will explore various methods to help you become a more conscious and responsible water user.

Take Shorter Showers

  • Set a timer to keep track of your shower duration.
  • Use a water-resistant shower timer to monitor your time efficiently.
  • Opt for shorter showers to save water and energy effectively.
  • Consider installing a low-flow showerhead to further reduce water usage.

Turn off the Water While Soaping Up

  1. Wet your body and hair thoroughly.
  2. Turn off the water while applying soap or shampoo.
  3. Lather up and scrub your body and hair.
  4. Turn the water back on to rinse off.

Use a Bucket to Collect Water

  • Place a large bucket in the shower to collect water while it warms up.
  • Once the water reaches the desired temperature, repurpose the collected water for watering plants or flushing the toilet.

Fix Any Leaks or Drips

  1. Identify the source of the leaks or drips in your shower.
  2. Inspect the showerhead, faucets, and pipes for any signs of leakage or dripping.
  3. Replace worn-out washers, O-rings, or other parts to fix the leaks.
  4. If necessary, seek professional assistance to repair any extensive damage.

Consider a Shower Timer

  1. Set a time limit for your showers, aiming for shorter durations to save water and energy.
  2. Use a shower timer to track your shower time more effectively and remind you when it’s time to finish up.
  3. Opt for timers with visual or audio cues to help you stay on track without constantly checking the clock.

Transform Your Shower Experience in Burnaby Today!

Upgrade to water-saving showers today! Contact New West Plumbing in Burnaby, BC at 236-300-3102 for expert installation and enjoy eco-friendly, efficient showers while saving on water bills. Request a free quote now!

FAQs about Water Saving Showers

What are water-saving shower heads?

Water-saving shower heads are shower systems designed to reduce water consumption while still providing a satisfying showering experience. These shower heads use various technologies like low-flow mechanisms, sensors, and water-recycling systems to conserve water and promote eco-friendliness.

What are the benefits of using water-saving shower heads?

Water-saving shower heads offer multiple benefits, including reduced water consumption, lower energy bills, and a smaller ecological footprint. They also help conserve clean and safe water resources, minimize the risk of sewage system failure, and promote a healthier environment for all living beings.

How do low-flow showerheads save water?

Low-flow shower heads use mechanisms like laminar flow restrictors and aerators to reduce the amount of water flowing through the showerhead without compromising pressure. They allow only 2.5 gallons of water per minute, compared to traditional shower heads that can use up to 5 gallons per minute.

Can water-saving shower heads improve energy efficiency?

Yes, water-saving shower heads can improve energy efficiency in your household. By reducing the amount of water used, you also reduce the energy needed to filter, heat, and pump water, resulting in lower energy bills. Additionally, some advanced water-saving shower systems have built-in sensors and algorithms that automatically track and adjust water flow, further improving energy efficiency.

How do you clean and maintain water-saving shower heads?

Cleaning and maintaining water-saving shower heads is essential to ensure they continue to function efficiently. You can clean them by soaking them in a mixture of vinegar and water to remove any mineral deposits. Regularly checking for clogs and replacing worn-out parts can also help maintain the shower head’s performance and prolong its lifespan.

What is the difference between traditional and water-saving shower heads?

The main difference between traditional and water-saving shower heads is the amount of water they allow to flow through per minute. Traditional shower heads can use up to 5 gallons of water per minute while water-saving shower heads use only 2.5 gallons or less. This difference in water consumption helps reduce energy bills and promote eco-friendliness.