Phone Number



843 Ewen Avenue, #11 New Westminster, BC, V3M0K6

Best Plumbing Tools for Plumbers in 2024

Are you tired of constantly struggling with plumbing issues in Burnaby? Do you want to be a more efficient plumber? Look no further! This article will discuss the top plumbing tools for plumbers in 2024. These tools will help you save time, money, and frustration, making your job easier and more successful.

What Are the Essential Plumbing Tools for Plumbers?

Having the right tools is crucial for efficiently and effectively completing plumbing jobs as a Burnaby plumber. But with so many options available, it can be overwhelming to determine which tools are essential. In this section, we will break down the top ten must-have plumbing tools for 2024, covering their uses and benefits. These tools are essential for any plumber’s toolbox, from tightening nuts and clearing clogs to cutting pipes and securing joints.

Pipe Wrench

  • Position the pipe wrench’s lower jaw against the pipe or fitting, then adjust the wrench so the upper jaw firmly grips the workpiece.
  • Turn the wrench handle in the direction you need to tighten or loosen the pipe or fitting.
  • For threaded joint connections, use the pipe wrench to hold the pipe while you tighten the fitting with another wrench.
  • Adjust the wrench for hex nuts to fit the nut, then turn the handle to tighten or loosen.

In 1870, Daniel C. Stillson patented the first practical pipe wrench, revolutionizing plumbing by providing a tool to tighten threaded joint connections, hex nuts, and pipes effectively.


  • Ensure the plunger’s cup fully covers the drain opening.
  • Position the plunger vertically and plunge vigorously to dislodge the clog.
  • Repeat the plunging motion several times to clear the blockage effectively.

Pro-tip: For stubborn clogs, supplement plunging with hot water and vinegar to effectively unclog drain lines for various plumbing jobs.

Pipe Cutter

  • Measure & mark: Determine the correct measurement for cutting.
  • Secure the pipe: Use a vise or clamps to secure the pipe in place.
  • Cut the pipe: Rotate the cutter around the pipe to create a score line, then tighten the blade and rotate until the pipe is cut.
  • Deburring: Remove any burrs from the cut end using a reaming tool or file.
  • Inspect: Ensure the cut is clean and free from any damage.

The pipe cutter was invented by Daniel C. Stillson in 1870, revolutionizing plumbing by allowing easy, precise cutting of metal pipes. It has since evolved to cut plastic pipes with additional spare blades for increased efficiency.

Adjustable Wrench

  • An adjustable wrench is essential for loosening or tightening nuts and bolts of various sizes.
  • Adjust the wrench to fit the nut or bolt, ensuring a secure grip and minimal movement.
  • Use the wrench in conjunction with a right-angle drill for confined spaces.

Did you know? The adjustable wrench was invented by Johan Petter Johansson in 1891.


  • Ensure the hacksaw blade is tightly secured for safety.
  • Mark the cutting area and use a suitable cutting fluid to ease the process.
  • Use firm, steady strokes to cut through the pipe, and periodically check for rough edges.
  • For longer use, keep spare blades on hand for replacement.

When using a hacksaw to cut pipes, it’s crucial to maintain steady strokes and inspect for rough edges. Keeping spare blades handy ensures uninterrupted work.


  • Use adjustable pliers for versatile gripping tasks, especially for plumbing jobs.
  • Channellock tongue and groove pliers provide strong, non-slip gripping, making them perfect for plumbing tasks.
  • Locking pliers secure and hold objects firmly during plumbing jobs, ensuring a stable and efficient work process.

Pro-tip: When using pliers for plumbing jobs, always ensure they are appropriate for the specific task to avoid damaging the plumbing fixtures.


  1. Inspect the clogged drain to determine the nature of the blockage.
  2. Select the appropriate automatic cordless drain drill based on the type and severity of the clog.
  3. Follow the manufacturer’s instructions to operate the drill, ensuring safety precautions are in place.
  4. Gently insert the auger into the drain line and activate it to clear the clog.
  5. Gradually feed the drill into the drain line while maintaining control to unclog the drain lines effectively.
  6. Once the drain lines are unclogged, carefully retract and clean the drill according to the maintenance guidelines.
  7. Test the drain to ensure successful unclogging and smooth flow of water.

Tape Measure

  • Measurements: Use the tape measure to accurately measure pipes, fittings, and spaces for precise cuts and installations.
  • Safety: Always use proper safety equipment, such as gloves and goggles, when using the tape measure to prevent injuries.
  • Versatility: The tape measure is essential for various plumbing jobs, including installing new pipes, replacing fixtures, and repairing leaks.

Caulking Gun

  1. Prepare the area: Clean and dry the surface around the pipe to ensure proper adhesion.
  2. Load the caulk gun: Load the caulk into the gun and cut the tip at a 45-degree angle to the desired thickness.
  3. Apply the caulk: Squeeze the trigger smoothly to apply an even bead of caulk around the pipe threads.
  4. Smooth the caulk: Use a damp cloth or your finger to smooth the caulk and create a proper seal.
  5. Inspect the surrounding environment: Check for any leaks or areas needing additional sealing.

Once, during an emergency call, a plumber used a caulk gun to seal a leaking pipe, preventing water damage and ensuring a quick fix for the customer.

Pipe Threader

  • Prepare the pipe: Cut the pipe to the required length using a pipe cutter.
  • Thread the pipe: Secure the pipe in a pipe vise and use a ratcheting pipe threader set to create threaded joint connections.
  • Assemble fittings: Place the threaded pipe into the fitting and use an adjustable wrench to tighten the nuts, ensuring a secure connection.

Once, during a plumbing emergency, a pipe threader saved the day by swiftly replacing a burst pipe, averting a potential flooding disaster.

What Are the Advanced Plumbing Tools for Plumbers?

As plumbing technology continues to evolve, so do the tools and equipment used by professionals in the industry. Plumbers 2024 will have access to various advanced plumbing tools that can make their jobs easier and more efficient. We will explore the top 10 essential tools for modern plumbing businesses and professionals. From drain cameras for thorough inspections to pipe bending tools for precise installations, these tools will help plumbers provide top-notch services to their clients. Let’s dive into the world of cutting-edge plumbing tools and their uses.

Drain Camera

  • Inspect for Drain Issues: Use the drain inspection camera to identify blockages, leaks, or damage within pipes.
  • Professional Assistance: Plumbing professionals rely on this tool to accurately diagnose and efficiently provide plumbing services.

Leak Detection Equipment

  • Check for a variety of leak detection equipment options available in the market, such as acoustic leak detectorstracer gas detectors, and thermal imaging cameras.
  • Invest in advanced technology like electronic leak detection devices, which can accurately pinpoint the source of leaks without causing damage to property.
  • Consider specialized training for your staff to effectively use and interpret data from these tools, enhancing your plumbing business’s credibility in the industry.

Staying updated with the latest leak detection equipment is essential for plumbing businesses to offer efficient and reliable services.

Water Pressure Gauge

  • Inspect the plumbing fixtures: Check the faucets, showerheads, and valves for signs of leaks or reduced water flow.
  • Connect the water pressure gauge: Attach the gauge to a water source and ensure it’s secure.
  • Record the pressure readings: Turn on the water and note the pressure displayed on the gauge.
  • Analyze the results: Compare the readings to standard pressure levels to identify irregularities.
  • Seek professional assistance if necessary: If the readings indicate a problem, consider consulting a plumber or using plumbing software to diagnose the issue.

For accurate readings, ensure the water pressure gauge suits the specific system. Regularly monitoring pressure can help prevent potential plumbing emergencies.

Pipe Inspection Camera

  1. Prepare the camera: Ensure the pipe inspection camera is fully charged and the cable is properly connected.
  2. Insert the camera: Carefully insert the camera into the pipe, navigating through bends and turns.
  3. Monitor the feed: Use plumbing software or the live feed to inspect the pipe’s condition.
  4. Document findings: Record and document any issues encountered during the inspection for plumbing jobs.

Pipe Locator

  1. Identify the Area: Before using the pipe locator, assess the site to pinpoint the area where the sewer lines or pipes need locating.
  2. Prepare the Equipment: Ensure that the pipe locator is in working condition and set it up according to the manufacturer’s instructions.
  3. Conduct the Search: Slowly move the pipe locator along the suspected path of the sewer lines, adjusting the settings as necessary.
  4. Verify the Findings: Once a signal is detected, carefully verify the location to confirm if it aligns with the plumbing job requirements.
  5. Record the Location: Mark the spot accurately for future reference and plumbing work.

Pipe Freezing Kit

  1. Prepare the pipe: Turn off the water supply. Clean and dry the pipe thoroughly.
  2. Set up the kit: Wrap the pipe with heat shields. Secure the flexible metal wire around the pipe.
  3. Freeze the pipe: Connect the pipe freezing kit to a power drill. Follow the manufacturer’s instructions to freeze the pipe.
  4. Complete the task: Once frozen, carry out necessary repairs or modifications.

During a plumbing emergency, a professional plumber used a pipe freezing kit to repair a burst pipe in a customer’s home, preventing extensive water damage and saving the day.

Hydro-Jetting Equipment

  • Assess the blockage: Identify the location and nature of the clog to determine the appropriate nozzle for the hydro-jetting equipment.
  • Prepare the area: Ensure the affected area is clear and take necessary precautions to prevent splashing.
  • Execute the cleaning process: Use the hydro-jetting equipment to propel high-pressure water into the drain, dislodging and flushing out debris and buildup.
  • Inspect the results: After cleaning, inspect the drain to verify that the blockage has been successfully removed.
  • Provide post-cleaning recommendations: Advise the property owner on maintenance to prevent future clogs.

During a routine drain cleaning, a plumbing company utilized hydro-jetting equipment to resolve a persistent clog. The high-pressure water successfully cleared the blockage, showcasing the effectiveness of professional plumbing services.

Pipe Descaling Tools

  1. Inspect the pipe for scale and corrosion to determine the appropriate descaling method.
  2. Select the correct descaling tool based on the pipe material, such as metal pipes requiring specialized descaling tools.
  3. Clean the pipe thoroughly before descaling to ensure optimal contact with the descaling tool.
  4. Use reaming tools to remove any burrs or rough edges before descaling.
  5. Apply acid flux using an acid flux brush to aid in the descaling process for metal pipes.

Pro-tip: Always wear protective gear and follow safety guidelines when using pipe descaling tools to prevent injuries and ensure effective descaling.

Soldering Tools

Prepare the area: Clear the workspace and ensure proper ventilation.

Cut the pipe: Use plastic pipe cutters for plastic piping or a pipe cutter for copper piping.

Clean the pipe: Use a wire brush to clean the ends of the pipe and fit it to be soldered.

Flux application: Apply flux to both the pipe and fitting.

Assemble the joint: Slide the fitting onto the pipe and heat the joint evenly with a plumber’s torch.

Soldering: Apply solder to the joint and wipe away any excess.

Cooling: Allow the joint to cool naturally.

For optimal results, invest in high-quality soldering tools and always follow safety precautions when working with a plumber’s torch.

Pipe Bending Tools

  • Ensure you have the necessary pipe bending tools for plumbing work, such as a quality angle drill and suitable fitting systems.

What Are the Must-Have Tools for Plumbing Emergencies?

Plumbers facing emergencies should have essential tools like pipe wrenches, a plunger, a pipe cutter, and a basin wrench to handle any unexpected issues. It’s also crucial to have a toilet auger, Teflon tape, and pipe joint compound on hand. In addition, a flashlight, utility knife, and adjustable wrench can come in handy for any unforeseen situation.

For a well-prepared plumber, investing in high-quality and durable tools from trusted brands such as Ridgid, Milwaukee, and DeWalt is essential. These tools are indispensable for handling any plumbing emergency with ease and efficiency.

Upgrade Your Plumbing Toolkit with New West Plumbing

Equip yourself with these cutting-edge plumbing tools for 2024 to enhance efficiency and quality in your plumbing endeavors. Investing in advanced tools not only saves time but ensures precision and reliability. Make your plumbing tasks in 2024 seamless with the right tools.

Ready to upgrade your toolkit? Contact New West Plumbing at (604)800-7695 for reliable services in Burnaby, BC.

FAQs about Best Plumbing Tools For Plumbers For 2024

What are the essential tools needed for plumbing?

Many tools can come in handy for plumbing jobs, but some of the most essential tools include pipe wrenches, adjustable pliers, a hacksaw, a power drill, and plumbing tape. These tools can help with tasks such as tightening or loosening nuts, cutting pipes, and sealing pipe threads.

What is the best plumbing software for professional plumbers?

Some popular options for plumbing software include FieldEdge, mHelpDesk, and ServiceTitan. These programs can help manage schedules, track inventory, and generate invoices for smaller plumbing businesses.

How can I easily remove push-to-connect fittings from pipes in tight spaces?

The best tool for this task is a push-to-connect fittings removal tool. Its compact design and one-handed operation make it easy to use in hard-to-reach places, and it can work with different types of pipes.

What is a good tool for cutting copper pipes?

Tubing cutters are the best tool for cutting copper pipes. They are specifically designed for this task and make clean, precise cuts without damaging the pipe.

What is the purpose of using thread-sealing tape in plumbing?

Thread sealing tape, also known as plumber’s tape, is used to seal pipe threads to prevent leaks. This thin film tape is applied to the threads of pipes and fittings before they are screwed together, providing an extra layer of protection against leaks.

What is the best way to remove a broken pipe nipple without damaging the pipe?

The ideal instrument for this task is a nipple extractor. This tool specifically removes old or broken pipe nipples without injuring the surrounding components. It is made of corrosion-resistant galvanized steel.