Phone Number

​604-256-5590

Address

843 Ewen Avenue, #11 New Westminster, BC, V3M0K6

How to Fix a Leaky Faucet

Are you tired of your faucet constantly dripping and wasting water? You’re not alone. A leaky faucet can be a frustrating and costly problem for many homeowners in Burnaby. However, with some essential tools and a little know-how, you can quickly fix it and save money on a plumber.

What Causes a Leaky Faucet?

A leaky faucet is not only annoying, but it also wastes water and can lead to higher water bills. Four main types of faucets can develop leaks: ceramic disk, ball type, cartridge, and compression. This section will discuss the common causes of leaky faucets and how to fix them. From worn-out washers and corroded valve seats to faulty O-rings and loose parts, we’ll cover each issue and provide step-by-step instructions for repairing them. By the end, you’ll be equipped with the knowledge and skills to fix any type of leaky faucet.

Worn Out Washers

  • Shut off the water supply to the faucet.
  • Disassemble the faucet to access the worn-out rubber washers or neoprene seals.
  • Inspect for any dropped parts and handle them carefully to avoid losing them.
  • Replace the worn-out rubber washers or neoprene seals.
  • Reassemble the faucet, making sure all parts are correctly placed and secured.
  • Turn the water supply back on and check for any leaks.

Corroded Valve Seat

  • Remove the decorative cap and handle screw to access the valve seat.
  • Inspect the valve seat for damage and mineral deposits.
  • If the valve seat is corroded, use a seat wrench to remove and replace it.
  • Clean any mineral deposits from the area before reassembling the faucet.

Fact: A leaky faucet drips at one drip per second can waste more than 3,000 gallons of water annually.

Faulty O-Rings

  • Remove the faucet handle and use needle nose pliers to remove the retaining clip.
  • Utilize a utility knife to cut off the O-ring and replace it with a new one.
  • Apply heatproof plumber’s grease to the new O-ring and reassemble the faucet.

To prevent future leaks, regularly check O-rings for wear and tear, clean the area, and use heatproof plumber’s grease during reassembly.

Loose Parts

  • Inspecting Loose Parts: Check the stem end and seat washers for signs of wear or damage.
  • Disassembling the Faucet: Use a small slotted screwdriver to carefully dismantle the compression faucet and examine the entire cartridge for any loose components.
  • Replacing Faulty Parts: Identify and replace any loose or damaged parts, ensuring a secure fit to prevent leaks.
  • Reassembling the faucet: Carefully reassemble and secure the parts to maintain proper functionality.

What Tools Do You Need to Fix a Leaky Faucet?

To fix a leaky faucet, you’ll need a faucet repair kit. The essential tools include rubber washers, emery cloth, and a replacement retainer ring. For fixing leaky faucets handles, use the correct size of wrench and screwdriver. At the bottom end, use an emery cloth to clean the valve seat. As a helpful tip, always turn off the water supply before starting any repairs.

How Do You Fix a Leaky Faucet?

Dealing with a leaky faucet can be a frustrating and costly experience. However, with some know-how and the right tools, you can easily fix it and save money on a plumber. This section will guide you through the step-by-step process of fixing a leaky faucet. From shutting off the water supply to replacing faulty parts and reassembling the faucet, we’ll cover everything you need to know. So grab your tools, and let’s start fixing that pesky leak!

Shut Off the Water Supply

  • Locate the main water valve in your home.
  • Turn the valve clockwise to shut off the water supply to the entire house or counterclockwise to shut off the specific faucet.
  • If you cannot find the main valve, use distilled white vinegar or a pipe repair clamp to stop the leak temporarily.
  • Before starting any repair, ensure the water is completely shut off to avoid accidents.

Disassemble the Faucet

  1. To disassemble the faucet, start by covering the sink with a soft scouring pad to prevent damage.
  2. Remove the decorative cap on top of the Handle Screw and unscrew it to access the faucet assembly.
  3. Inspect for mineral deposits or corrosion and clean the components thoroughly to ensure smooth operation.
  4. Once the parts are cleaned and checked for damage, proceed with the necessary repairs or replacements.
  5. Reassemble the faucet by following the reverse order of the disassembly steps.

Replace Faulty Parts

  • Use needle nose pliers to remove the retaining clip.
  • With a utility knife, carefully remove the cap.
  • Apply heatproof plumber’s grease to the entire cartridge’s O-ring.
  • Reinsert the cartridge, ensuring it sits flush with the stem end.
  • For a compression faucet, replace the seat washers using a small slotted screwdriver.

Fact: The average household’s leaky faucets can waste more than 10,000 gallons of water yearly.

Reassemble the Faucet

  1. Reassemble the faucet by placing the replacement retainer ring in the bottom end of the faucet body.
  2. Secure the retainer ring with the attachment screws using the exact size screwdriver.
  3. Tighten the packing nut with an adjustable wrench.
  4. Attach the faucet handles and use an emery cloth to clean the faucet body and handle contact areas.
  5. Turn on the water supply and check for any leaky handles.

To prevent future leaks, regularly clean and lubricate the faucet parts, avoid using excessive force when turning off the faucet, and replace rubber washers when necessary.

Turn the Water Supply Back On

  • Locate the shutoff valve for the hot water supply connected to the leaky faucet.
  • Turn the shutoff valve clockwise to stop the flow of hot water.
  • Use a soft scouring pad to remove mineral deposits around the shutoff valve.
  • Once cleaned, turn the shutoff valve counterclockwise to restore the hot water supply.

What Are Some Tips for Preventing a Leaky Faucet?

Leaky faucets can be a nuisance and can also waste a significant amount of water and money. It is important to take preventative measures to avoid this common plumbing issue. In this section, we will discuss some tips for preventing a leaky faucet, including checking and replacing rubber washers, dealing with mineral buildup, and installing a new cartridge. Following these simple steps can save you from the frustration of a leaky faucet and potentially costly repairs.

Regularly Check and Replace Washers

  • Regularly checking and replacing rubber washers can prevent leaks and ensure a tight seal.
  • To avoid mineral buildup, periodically clean the area around the rubber washers in a kitchen faucet.
  • Consider installing a new cartridge in the faucet to prevent frequent wear and tear on the rubber washers.

Clean and Lubricate Faucet Parts (Keywords: Soft Sc

Turn off water: Shut off the water supply to the faucet.

Disassemble the faucet: Detach the handle, stem, and other components.

Clean parts: Use a soft scouring pad to eliminate debris and mineral buildup as part of regular maintenance for your faucet.

Lubricate: Apply silicone-based grease to the O-rings and other moving parts to ensure smooth operation.

Reassemble: Put the parts back together and test the faucet.

For ongoing maintenance, remember to clean and lubricate faucet parts every six months to prevent leaks and maintain optimal performance.

Take Control of Your Leaky Faucet in Burnaby Today

Fixing a leaky faucet in your Burnaby home is manageable with the right tools and DIY knowledge. By addressing common issues like worn-out washers, corroded valve seats, faulty O-rings, or loose parts, you can solve this problem step by step.

Remember, a leaky faucet not only wastes water but also raises bills. You can avoid future leaks with preventive measures like regular washer checks and cleaning.

Take charge today! Contact New West Plumbing at (604)800-7695 in Burnaby or (604)256-5590 in New Westminster to schedule your appointment and say goodbye to that pesky leak!

FAQs about How To Fix A Leaky Faucet

How do I fix a dripping faucet?

First, turn off the water supply under the sink to fix a dripping faucet. Then, identify the type of faucet you have (cartridge, compression, ceramic disk, or ball type) and follow the specific instructions for that type. Make sure to have the necessary tools and replacement parts on hand, and don’t forget to cover the drain to catch any dropped parts.

Can I fix my leaky faucet myself?

Yes, repairing a leaky faucet is an easy and inexpensive project that you can do yourself. The key is in knowing how to fix your particular type of faucet. Follow the instructions for your type of faucet, and ensure the tools and replacement parts are on hand.

Do I need to replace any parts to fix my leaky faucet?

It depends on the type of faucet you have. For compression faucets, the seat washers will likely need to be replaced. The O-ring or neoprene seal may need to be replaced for cartridges, ceramic disks, or ball-type faucets. Be sure to match the size and length of the replacement parts to your faucet model.

Where can I find replacement parts for my faucet?

You can find replacement parts for your faucet at your local hardware store. Bring the old parts with you to ensure you get the correct replacements. You can also purchase a faucet repair kit, which includes all the necessary parts for your type of faucet.

Why is my faucet leaking?

A faucet can leak for a variety of reasons. In most cases, it is due to worn parts such as O-rings, washers, or seals. Mineral deposits or corrosion can also cause a faucet to leak. It’s important to fix a leaking faucet to avoid wasting water and to prevent further damage to the faucet.

Can I use a home warranty to cover fixing my leaky faucet?

Yes, a home warranty may cover the cost of repairing or replacing a leaking faucet. Make sure to review your home warranty policy to see if it includes coverage for plumbing fixtures. You may also be able to request a repair or replacement through your home warranty provider.